Don’t miss the deadline to nominate your Outstanding Young IM Professional! The Society of Plastics Engineers-Injection Molding Division (SPE-IMD) is announcing a new award to recognize young engineers and plastics […]
Outstanding Young Injection Molding Professional Award (OYIMP)
The Society of Plastics Engineers-Injection Molding Division (SPE-IMD) is announcing a new award to recognize young engineers and plastics professionals who are in the injection molding industry, the Outstanding Young […]
Fusion Labeling Technology Makes Low Surface Energy (LSE) Polyolefin Durable Goods Safer
By Matthew Stevenson Polyfuze / Mold In Graphic Systems Safety Labeling Standards From the late 1970’s to present, Consumer Safety has become the driving force behind safety labeling standards that […]
Vibration Assisted Injection Molding for PLA with Enhanced Mechanical Properties and Reduced Cycle Time
By J. Coulter, P. Gao, A. Duhduh, A. Kundu Manufacturing Science Laboratory Lehigh University, Bethlehem, PA, 18015 This research was focused on the effect of processing parameters on physical characteristics […]
Things You Should Know Before Selecting a Mold Temperature Controller
In injection molding, we usually control the mold at a fixed temperature by making coolant continuously flow through the mold. If the coolant flow is not enough, or the coolant […]
Gas Assist Injection Molding
By Dallas Cada. DCC Consulting Gas assist injection molding is a process with a high speed and low-pressure injection method. It involves the injection of high-pressure nitrogen gas into the […]
Webinar: Managing Difficult People Without Becoming One of Them
October 30, 2019 at 11:00AM–Noon EDTWebinar via ZoomPatricia Simpson Being an effective and positive communicator at work is vital to every role. When we work with other people, however, communication […]
Webinar: Giving High Impact Feedback
October 17, 2019 at Noon–1:00PM EDTWebinar via Zoom Giving ongoing feedback to direct reports and colleagues is one of a manager’s and team leader’s most critical responsibilities. Feedback helps enhance […]
Webinar: Degradation Failure of Plastics
October 10, 2019 at 11:00AM–Noon EDT Webinar via Zoom Plastic materials offer a unique balance of strength and ductility associated with their inherent viscoelastic nature. However, they are susceptible to […]
Molding Graphics to hold open house
Marty Mares, the CEO of Molding Graphics is holding an open house on October 10 and has opened the invitation to Members of SPE! Please forward the invitation to anyone […]
