By Cynthia Kustush, Melt Design Inc. Equatemp® Single Zone Hot Sprue Bushings from Melt Design Inc. (MDi), a leading designer and manufacturer of hot runner systems and components, began a […]
X2F’s New Capability Opens Up Higher-Volume Production for Encapsulated Electronics and Automotive Optics
Company Adds Rotary Table to its Transformative Plastics Molding Process X2F, the developer of a transformative plastics processing technology, has added a rotary table which reduces cycle times and opens […]
Effinno Technical Brief
By Hank Tsai What is a “burn mark”? Herein burn mark refers to a defect of injection molded parts with the phenomenon of gray, brown, or black and tar-like local […]
Moldex3D 2022 Infusing Competence for Transformation
CoreTech System Co., Ltd. (Moldex3D) has announced the release of Moldex3D 2022 – the latest version of its molding analysis software series. The brand new Moldex3D continuously reinforces the system […]
A Generation Transition: CoreTech System Appointed New Chairman and CEO
CoreTech System Co., Ltd. (Moldex3D) announced the appointments of Dr. David Hsu as its new Chairman, and Dr. Venny Yang as the new Chief Executive Officer effective April 19, […]
How to Achieve Sustainability Goals: Solving 4 Challenges You May Face When Designing for Recycled Resins
By Jessica Huang, Marketing Specialist of CoreTech System (Moldex3D) With climate change getting worse, people have become more conscious of their impact to the environment. Companies are receiving growing pressure […]
Non-Matching Mesh Simulation Now Supports RTM Process
For the curved surfaces commonly found on polymer reinforced composite products, complex ply designs are required. Therefore, before the modeling of the resin transfer molding (RTM) process, the corresponding solid […]
Progressive Introduces New Configurable CAD and a Simplified Mold-Ready™ Ordering System
Progressive Components announces the release of its CADalog® v14, a streamlined CAD offering for designers of injection molds. Available at no charge either online or via a flash drive, […]
Effect of Overflow Tab on Major Modulus of Weld Line in Glass Fiber Filled Injection Molded Parts
By Amanda Nicholson, Customer Success Engineer at Moldex3D North America, Inc. Weld lines in injection molded plastic parts can cause a localized reduction of mechanical properties. This loss of strength […]
Optimized Adhesion Tips for TPE Materials and Substrate Pillars
By Dallas D. Cada Whenever I get a trouble shooting call about TPE parts it usually is a result of poor adhesion. My experience with TPE materials is in automotive […]
