| Fellow | Sponsoring Division/SIG | Section | Year |
| Adur, Ashok M., Dr. | Polymer Modifiers & Additives | none | 2018 |
| Ajji, Abdella, Dr. | Flexible Packaging | Quebec | 2019 |
| Amon, Moris, Dr. | Extrusion | Cleveland | 2006 |
| Anton, Stanley J. | Vinyl Plastics | Palisades | 1992 |
| Arendt, William D. | Vinyl Plastics | Chicago | 2008 |
| Auerbach, Andrew B. | Polymer Modifiers & Additives | Newark | 2002 |
| Avakian, Roger W. | Thermoplastic Materials & Foams | none | 2020 |
| Bacaloglu, Radu, Dr. | Vinyl Plastics | Palisades | 2007 |
| Bachman, Bonnie J., Dr. | Electrical & Electronic | South Florida | 2005 |
| Baer, Eric | Engineering Properties & Structure | Cleveland | 1997 |
| Bagrodia, Shriram, Dr. | Engineering Properties & Structure | Tenn-VA-Holston Va | 2004 |
| Baird, Donald G., Dr. | Engineering Properties & Structure | Upper Midwest | 1997 |
| Barger, Mark | Blow Molding | Mid-Michigan | 2005 |
| Barr, Robert A. | Extrusion | Piedmont Coastal | 1985 |
| Barry, Carol Forance, Dr. | Injection Molding | Eastern New England | 2018 |
| Beall, Glenn | Mold Making & Mold Design | Chicago | 1985 |
| Beard, Robert A. | Injection Molding | Chicago | 1990 |
| Beatty, Charles L., Dr. | Engineering Properties & Structure | Central Florida | 1994 |
| Beaumont, John P. | Injection Molding | Northwestern Pennsy | 2007 |
| Belcher, Sam L. (D) | Blow Molding | Miami Valley | 1988 |
| Benatar, Avraham, Dr. | Engineering Properties & Structure | Central Ohio | 2003 |
| Benning, Calvin J., Dr. (D) | Thermoplastic Materials & Foams | Newark | 1991 |
| Bernhardt, Ernest C., Dr (D) | Injection Molding | Newark | 1989 |
| Bhargava, Vikram | Product Design & Development | New York | 2000 |
| Bigio, David I., Dr. | Extrusion | Baltimore-Washington | 2005 |
| Billmeyer, Fred W., Jr. (D) | Color & Appearance | Hudson-Mohawk | 1993 |
| Bistrup-Allen, Sue Ann | Polymer Analysis | Southern | 2002 |
| Blyler, Lee L., Jr | Injection Molding | Newark | 1999 |
| Bonner, Robert M. | Extrusion | Golden Gate | 1987 |
| Bopp, Richard C., Dr. | Engineering Properties & Structure | Upper Midwest | 2011 |
| Bose, Ajit K. | Extrusion | Cleveland | 1992 |
| Braddicks, Jr. Robert P. (D) | Vinyl Plastics | Palisades | 1985 |
| Brookman, Robert S., Dr. (D) | Vinyl Plastics | Palisades | 1992 |
| Broutman, Lawrence | Engineering Prop & Structure | Chicago | 2001 |
| Buja, Frederick J. | Injection Molding | Rochester | 1985 |
| Bur, Anthony J. | Plastic Analysis | Baltimore-Washington | 1997 |
| Burley, Joseph W., Dr. | Vinyl Plastics | Palisades | 2005 |
| Campbell, Gregory A., Dr. | Extrusion | Detroit | 2004 |
| Canterino, Peter J., Dr. | Plastics Recycling | Newark | 1994 |
| Carley, James F., Dr. | Extrusion | Golden Gate | 1985 |
| Carr, Stephen Howard | Engineering Properties & Structure | Chicago | 2019 |
| Castro, Jose M., Dr. | Thermoset | Central Ohio | 2009 |
| Chang, Rong-Yeu | Injection Molding | | 2016 |
| Charvat, Robert | Color & Appearance | Ohio Firelands | 2000 |
| Chatterjee, Ananda M., Dr. (D) | Thermoplastic Materials & Foams | South Texas | 2008 |
| Chaudhary, Bharat | Thermoplastic Materials & Foams | Palisades | 2016 |
| Chen, Shia-Chung, Dr. | Injection Molding | Taiwan | 2009 |
| Cheng, C Y | Extrusion | South Texas | 2001 |
| Chum, Steve P. | Thermoplastic Materials & Foams | South Texas | 2000 |
| Chung, Chan I., Dr. | Extrusion | Hudson-Mohawk | 1985 |
| Clark, Edward S., Dr. | Engineering Properties & Structure | Tennessee Valley | 1984 |
| Cloeren, Peter F., Jr. | Extrusion | Tex-La-Gulf | 2006 |
| Coaker, A. William, Dr. | Vinyl Plastics | Connecticut | 1996 |
| Coleman, Ernest A., Dr. (D) | Polymer Modifers & Additives | Newark | 1994 |
| Collins, Frederick H. | Thermoplastic Materials & Foams | Hudson-Mohawk | 1995 |
| Colton, Jonathan S., Dr. | Composites | Southern | 2004 |
| Cooper, Anthony R., Dr. | Plastics Analysis | Golden Gate | 1992 |
| Costeux, Stéphane | Thermoplastic Materials & Foams | Detroit | 2016 |
| Cowell, Richard D. | Polymer Modifiers & Additives | Newark | 2002 |
| Crawford, Robert J. (Roy), Dr. | Rotational Molding | Australia-New Zeala | 2005 |
| Czuba, Len | Medical Plastics | Chicago | 2015 |
| Darby, Joseph R. (D) | Vinyl Plastics | St. Louis | 1985 |
| Dave, Vipul, Dr. | Medical Plastics | Philadelphia | 2017 |
| Davis, Donna S. | Flexible Packaging | South Texas | 2019 |
| Dealy, John M. Prof. | Plastics Analysis | Quebec | 1996 |
| Deanin, Rudolph D., Dr. | Thermoplastic Materials & Foams | Eastern New England | 1994 |
| DeLong, Robert D. | Blow Molding | South Texas | 2002 |
| Demirors, Mehmet , Dr. | Engineering Properties and Structure | Golden Gate | 2018 |
| Denson, Costel, Dr. | Extrusion | Philadelphia | 2003 |
| Derezinski, Stephen, Dr. (D) | Extrusion | Rochester | 2013 |
| Dispenza, Jack | Injection Molding | Newark | 2002 |
| Dooley, Joseph, Dr. | Extrusion | Mid Michigan | 2003 |
| Driscoll, Steve B. | Engineering Prop & Structure | Eastern New England | 2000 |
| Drzal, Lawrence T., Dr.. | Composites | Detroit | 2004 |
| D'Souza, Nandika Anne, Dr | Polymer Analysis | South Texas | 2013 |
| Dunkelberger, David L. | Vinyl Plastics | Philadelphia | 1996 |
| Dunn, Thomas | Flexible Packaging | Southern | 2016 |
| Duska, Joseph | Extrusion | Central Florida | 1998 |
| Duvdevani, Ilan, Dr. | Engineering Properties & Structure | Newark | 1992 |
| Eby, Ronald K., Dr. | Engineering Properties & Structure | Baltimore-Washington | 1984 |
| Eise, Kurt F. | Extrusion | Newark | 1992 |
| Enns, John B. | Polymer Analysis | Central Florida | 2000 |
| Epstein, George | Composites | Southern California | 2009 |
| Erwin, Lewis, Dr. (D) | Extrusion | Chicago | 1985 |
| Estabrook, Jr., F. Reed | Injection Molding | Southeastern New En | 1992 |
| Evans, W. Benjamin (D) | Injection Molding | Miami Valley | 1992 |
| Ezrin, Myer (D) | Polymer Analysis | Western New England | 1999 |
| Falla, Daniel | Flexible Packaging | Ontario | 2018 |
| Farris, Richard J. | Plastics Analysis | Eastern New England | 1997 |
| Favis, Basil D., Dr. | Engineering Properties & Structure | Quebec | 2007 |
| Feger, Dr. Claudius | Plastics Analysis | Mid-Hudson | 1997 |
| Ferguson, Lewis E. | Blow Molding | Philadelphia | 2006 |
| Finch, Charles R., Dr. | Extrusion | Mid-Michigan | 1992 |
| Finkel, Henry (D) | Product Design & Development | Quebec | 1995 |
| Fisch, Michael H. | Vinyl Plastics | Palisades | 2002 |
| Forsyth, T. Henry, Dr. | Injection Molding | Cleveland | 2004 |
| Frankland, James D. Jr. | Extrusion | Pittsburgh | 1992 |
| Freeborn, George E. | Injection Molding | Central Texas | 1992 |
| Galiatsatos, Vassilios | Polymer Analysis | Rio Grande | 2002 |
| Gandhi, Umesh, Dr. | Automotive | Detroit | 2021 |
| Gao, Furong, Dr. | Injection Molding | Hong Kong | 2011 |
| Garcia-Rejon, Andres (D) | Blow Molding | Quebec | 2001 |
| Gaylord, Norman G., Dr. | Polymer Modifiers & Additives | Newark | 1990 |
| Gedemer, Thomas J. | Plastics Analysis | Chicago | 1989 |
| Gilbert, Robert W. | Blow Molding | Chicago | 1988 |
| Gillespie Jr., John W., Dr. | Composites | none | 2018 |
| Gillham, John K. | Polymer Analysis | Newark | 2000 |
| Gobstein, Saul | Vinyl Plastics | Cleveland | 1985 |
| Goettler, Lloyd A. | Engineering Properties & Structure | Western New England | 1993 |
| Gogos, Costas G. | Extrusion | Newark | 2001 |
| Gould, Russell J. (D) | Extrusion | Chicago | 1990 |
| Grady, Brian P. | Engineering Properties & Structure | Oklahoma | 2012 |
| Green, Joseph | Electrical & Electronic | Newark | 1994 |
| Greener, Jehuda | Engineering Properties & Structure | Rochester | 1999 |
| Gregory, Robert, B. | Extrusion | Piedmont Coastal | 1987 |
| Grewell, David, Dr. | Decorating & Assembly | Iowa | 2008 |
| Grossman, Richard F. PhD. | Vinyl Plastics | Palisades | 1993 |
| Gupta, Mahesh, Dr. | Extrusion | Mid Michigan | 2013 |
| Haaxma, Harry C., Dr. | Injection Molding | Detroit | 1992 |
| Hagberg, Carl G., Dr. | Extrusion | Philadelphia | 2004 |
| Hansen, Marion | Engineering Properties & Structure | Smoky Mountain | 1999 |
| Hansen, Ralph H. (D) | Thermoset | Chicago | 1989 |
| Haque, Enamul, Dr. | Composites | Detroit | 2006 |
| Haas, Thomas W., Dr. | Medical Plastic | Medical Plastics Virginia | 2019 |
| Hauser, Ray L. | Engineering Properties & Structure | Rocky Mountain | 2004 |
| Henneberry, Gary | Blow Molding | Philadelphia | 2001 |
| Henning, Frank, Dr. | Composites | Central Europe | 2013 |
| Herbst, Clarence A., Sr. (D) | Plastics Analysis | Kentuckiana | 1992 |
| Hirt, Douglas E., Dr. | Polymer Modifiers & Additives | Carolinas | 2009 |
| Hoffman, Frank E. (D) | Extrusion | Central Ohio | 1985 |
| Hopmann, Christian, Dr.) | Injection Molding | none | 2019 |
| Howard, Jesse M., III | Thermoplastic Materials & Foams | Newark | 1992 |
| Hu, Yushan, Dr. | Engineering Properties & Structure | none | 2021 |
| Hubbauer, Philip | Injection Molding | Newark | 1993 |
| Hunkar, Denes B., Dr. (D) | Blow Molding | Miami Valley | 1992 |
| Hunter, Donald H. | Vinyl Plastics | Philadelphia | 1989 |
| Hylton, Donald C., Sr. | Thermoforming | Southern | 1997 |
| Hyun, Kun Sup, Dr. | Extrusion | Mid-Michigan | 1996 |
| Isayev, Avraam I., Dr. | Engineering Properties & Structure | Akron | 2008 |
| Ishida, Hatsuo, Dr. | Composites | Cleveland | 2006 |
| Jabarin, Saleh A., Dr. | Blow Molding | Toledo | 2007 |
| Jakopin, Stan J. | Extrusion | Chicago | 1994 |
| Jana, Sadhan C., Dr. | Engineering Properties & Structure | Akron | 2008 |
| Jansen, Jeffrey A. | Injection Molding | Milwaukee | 2021 |
| Jones, Roger F. (D) | Thermoplastic Materials & Foams | Philadelphia | 1985 |
| Kakarala, Norm, Dr. | Automotive | Detroit | 2004 |
| Kalyon, Dilhan, Dr. | Extrusion | Newark | 2004 |
| Kamal, Musa R., Dr. | Engineering Properties & Structure | Quebec | 1995 |
| Kapur, Mridula | Engineering Properties and Structure | South Texas | 2016 |
| Karjala, Teresa, Dr. | Engineering Properties and Structure | South Texas | 2017 |
| Karol, Frederick J., Dr. | Vinyl Plastics | Newark | 1995 |
| Katz, Harry S. | Polymer Modifiers & Additives | Newark | 2000 |
| Kazmer, David O., Dr. | Injection Molding | Pioneer Valley | 2011 |
| Kenig, Samuel | Engineering Prop & Structure | Israel | 2001 |
| Kiziltas, Alper, Dr. | Automotive | Detroit | 2022 |
| Klein, Imrich, Dr. (D) | Extrusion | Newark | 1994 |
| Kohan, Melvin I. | Engineering Properties & Structure | Philadelphia | 1998 |
| Koppi, Kurt A., Dr. | Applied Rheology | Detroit | 2020 |
| Kosior, Edward I. | Plastics Environmental | Australia-New Zeala | 2008 |
| Kotaki, Masaya | Engineering Properties and Structure | South Texas | 2016 |
| Kramer, William A. | Extrusion | none | 2022 |
| Krauskopf, Leonard G. | Vinyl Plastics | Palisades | 1998 |
| Krishnaswamy, Rajendra K., Dr. | Engineering Properties & Structure | Eastern New England | 2009 |
| Kruder, George A., Dr. (D) | Extrusion | Central Ohio | 1985 |
| Krueger, Walter L. | Extrusion | Upper Midwest | 1988 |
| Kumar, Vipin | Thermoplastics Materials & Foams | Pacific Northwest | 2002 |
| Kurtz, Stuart J. | Polymer Analysis | Newark | 2001 |
| Kusuma, David | Injection Molding | | 2016 |
| Lan, Tie, Dr. | Engineering Properties and Structure | none | 2018 |
| Landes, Brian, Dr | Engineering Properties & Structure | Mid Michigan | 2013 |
| Lavach, Mark | Vinyl Plastics | Palisades-New Jersey | 2021 |
| Lavitt, Seymour E. | Injection Molding | Western New England | 1992 |
| Lee, L. James | Polymer Analysis | Central Ohio | 2001 |
| Lee, Norman C. | Plastics Environmental | Carolinas | 2002 |
| Lee, Shau-Tarng | Thermoplastic Materials & Foams | Palisades | 2001 |
| Lesser, Alan J., Dr. | Polymer Analysis | Eastern New England | 2005 |
| Li, Tieqi, Dr. | Applied Rheology | none | 2021 |
| Liang, (Lora) Ying , Dr. | Engineering Properties & Structure | none | 2019 |
| Lobo, Hubert | Product Design & Development | Rochester | 2002 |
| Lutz, John T., Jr. | Vinyl Plastics | Philadelphia | 1986 |
| Mack, Martin | Extrusion | Carolinas | 2014 |
| Macosko, Christopher W. | Plastics Analysis | Upper Midwest | 1997 |
| Maddock, Bruce H.(D) | Extrusion | Newark | 1992 |
| Malloy, Robert A., Dr. | Product Design & Development | Eastern New England | 2010 |
| Manas-Zloczower, Ica, Dr. | Extrusion | Cleveland | 2006 |
| Mansson, Jan-Anders, Dr. | Composites | Central Indiana | 2019 |
| Mano, Eloisa Biasotto, Dr. | Composites | Brazil | 2004 |
| Manzione, Louis T., Dr. | Electrical & Electronic | Delaware Valley | 1994 |
| Marom, Gad, Dr. | Composites | Israel | 2004 |
| Martin, George C. | Polymer Analysis | Rochester | 2000 |
| Mather, Patrick T., Dr. | Polymer Analysis | Rochester | 2009 |
| Matsuoka, Shiro, Dr. | Engineering Properties & Structure | Newark | 1985 |
| Matuana, Laurent | Vinyl Plastics | Detroit & Western Michigan | 2014 |
| Maxwell, Bryce (D) | Engineering Properties & Structure | Newark | 1992 |
| McCarthy, Steven | Medical Plastics | Eastern New England | 2016 |
| McConnell, William K. (D) | Thermoforming | North Texas | 1988 |
| McKelvey, James M., Dr. | Extrusion | St. Louis | 1985 |
| McKenna, Gregory B., Dr. | Plastics Analysis | Baltimore-Washington | 1998 |
| McKinney, Paul V., Dr. (D) | Vinyl Plastics | South Florida | 1988 |
| Mehta, Kishor S. | Injection Molding | Pittsburgh | 1984 |
| Misra, Manjusri, Professor | Injection Molding | Ontario | 2021 |
| Mitchell, Monroe S. (D) | Blow Molding | Southern | 1988 |
| Mitsoulis, Evan, Dr. | Extrusion | No Section | 2009 |
| Mohanty, Amar Kumar, Dr. | Injection Molding | none | 2019 |
| Monte, Salvatore J. | Thermoplastic Materials & Foams | Palisades | 2004 |
| Moore, Dale P. | Injection Molding | Detroit | 2006 |
| Morris, Barry A., Dr. | Extrusion | Philadelphia | 2005 |
| Mount III, Eldridge M., PhD. | Extrusion | Rochester | 2000 |
| Mulholland, Bruce M. | Color & Appearance | Miami Valley | 2004 |
| Muller, Bruce M. | Rotational Molding | Ohio Firelands | 2009 |
| Murray, Dr. Allan D. | Automotive | Detroit | 1997 |
| Naguib, Hani E., Dr. | Thermoplastic Materials & Foams | Ontario | 2015 |
| Nalle, George, S. Jr. (D) | Extrusion | Central Texas | 1991 |
| Nass, Leonard I. (D) | Vinyl Plastics | Palisades | 1985 |
| Neubauer, Anthony Charles | Extrusion | Palisades | 2014 |
| Nichols, Russell J. | Extrusion | Connecticut | 1996 |
| Nissel, Frank R. | Extrusion | Philadelphia | 1993 |
| Nissle, William N. | Extrusion | Philadelphia | 1992 |
| Noller, Richard M. | Product Design & Development | Chicago | 2002 |
| Noriega, Maria del Pilar, Dr. | Extrusion | none | 2019 |
| Nufer, Robert W. | Electrical & Electronic | Mid-Hudson | 1989 |
| Nunn, Robert E., Dr. (D) | Injection Molding | Eastern New England | 1986 |
| Oberst, Horst W. | Extrusion | Hudson-Mohawk | 1995 |
| O'Brien, Keith T., Dr. | Injection Molding | Newark | 1991 |
| Ogale, Amod A. | Electrical & Electronic | Carolinas | 2012 |
| Ohshima, Masahiro, Prof | Thermoplastics Materials & Foams | Japan | 2014 |
| Osswald, Tim A., Dr. | Composites | Milwaukee | 2008 |
| Otaigbe, Joshua U. | Engineering Properties & Structure | Mississippi | 2005 |
| Pang, Su-Seng, Dr. | Joining of Plastics & Composites | Gulf South Central | 2006 |
| Pape, Peter G. | Polymer Modifiers & Additives | Mid-Michigan | 2001 |
| Park, Chul B., Dr. | Thermoplastic Materials & Foams | Ontario | 2004 |
| Park, Chung P., Dr. | Thermoplastic Materials & Foams | Eastern New England | 2004 |
| Park, Russell A.(D) | Vinyl Plastics | Philadelphia | 1989 |
| Patel, Rajen M., Dr. | Engineering Properties & Structure | South Texas | 2009 |
| Paul, Donald, Dr. | Engineering Properties & Structure | Central Texas | 2004 |
| Peacock, Andrew J., Dr. | Thermoplastics Materials & Foams | Virginia | 2011 |
| Pearce, Eli M., Dr. | Polymer Modifiers & Additives | New York | 1988 |
| Pearson, Raymond A., Dr. | Engineering Properties & Structure | Lehigh Valley | 2010 |
| Perdikoulias, John, Dr. | Extrusion | Ontario | 2019 |
| Peters, Don L. | Blow Molding | Bartlesville-Tulsa | 1987 |
| Pham, Hoang T. | Engineering Properties & Structure | No Section affiliation | 2012 |
| Pochan, John M., Dr. | Engineering Properties & Structure | Baltimore-Washington | 1994 |
| Portnoy, Robert C. | Medical Plastics | South Texas | 2002 |
| Poston, Irvin, E PE | Automotive | Detroit | 2014 |
| Prall, George M. | Extrusion | Central Florida | 1992 |
| Priddy, Duane B., Dr. | Plastics Analysis | Mid-Michigan | 2008 |
| Prime, Bruce R. | Plastics Analysis | Golden Gate | 1998 |
| Progelhof, Richard C., Dr. | Injection Molding | Virginia-Carolinas | 1987 |
| Rabinovitch, Elvira B. | Vinyl Plastics | Cleveland | 1994 |
| Rainville, Dewey | Injection Molding | Newark | 1994 |
| Rajagopalan, Murali, Dr. | Engineering Properties & Structure | Southeastern New England | 2006 |
| Ramesh, Natarajan S. | Thermoplastics Materials & Foams | North Texas | 2002 |
| Rao, Natti S., Dr. | Product Design & Development | South Texas | 2006 |
| Rathman, John | Blow Molding | Oklahoma | 2017 |
| Rauwendaal, Chris J., Dr. | Extrusion | Golden Gate | 1992 |
| Reid Jr., Austin H. | Color & Appearance | Tennessee Valley | 2002 |
| Reinicker, Roger | Color and Appearance | Philadelphia | 2016 |
| Reitman, Marureen T.F., Sc.D., Dr | Medical Plastics | Maryland-Baltimore | 2015 |
| Riga, Alan T., Dr. | Plastics Analysis | Cleveland | 1992 |
| Riley, David W., Dr. (D) | Extrusion & Vinyl Plastics | Palisades | 1986 |
| Ringwood, Robert C. (D) | Vinyl Plastics | Palisades | 1992 |
| Rodriguez-Perez, Miguel, Dr. | Thermoplastic Materials & Foams | Spain | 2017 |
| Rohn, Charles | Plastics Analysis | Newark | 1998 |
| Roller, Mark B., Dr | Plastics Analysis | Newark | 1995 |
| Ronca, Piero V. | Polymer Analysis | Ontario | 2000 |
| Rosato, Domick V. (Nick) | Injection Molding | Eastern New England | 1984 |
| Rotheiser, Jordan (D) | Product Design & Development | Chicago | 2000 |
| Rowan, Sr., Edward W. | Injection Molding | Newark | 1992 |
| Rubin, Irvin I. (D) | Injection Molding | New York | 1989 |
| Ryntz, Rose Ann, Dr. | Automotive | Detroit | 2006 |
| Sacher, Alex | Engineering Prop & Structures | New York | 1999 |
| Sakai, Tadamoto, Dr. | Extrusion | Japan | 2003 |
| Sample, Paul E. | Polymer Analysis | Philadelphia | 2002 |
| Samuels, Robert J. | Polymer Analysis | Southern | 2001 |
| Schirmer, Henry G. | Thermoplastic Materials & Foams | Carolinas | 1998 |
| Schmidt, Lawrence R., Dr. | Extrusion | Hudson-Mohawk | 1990 |
| Schott, Nick R., Dr. | Extrusion | Eastern New England | 1986 |
| Schrenk, Walter J. (D) | Extrusion | Mid-Michigan | 1992 |
| Scola, Daniel A., Dr. | Composites | Connecticut | 1994 |
| Sehanobish, Kalyan, Dr. | Engineering Properties & Structure | Detroit | 2011 |
| Serle, Allan G. (D) | Injection Molding | Newark | 1989 |
| Shah, Suresh | Automotive | Detroit | 2001 |
| Shastri, Ranganath, Dr. | PD3 | Mid Michigan | 2003 |
| Shaw, Montgomery T. | Engineering Prop & Structure | Western New England | 2000 |
| Shih, Chi-Kai, Dr. | Plastics Analysis | Philadelphia | 1997 |
| Simon, Frederick T., Prof. | Color & Appearance | Southern | 1996 |
| Simon, Sindee L., Dr. | Polymer Analysis | Central Texas | 2005 |
| Spalding, Mark, Dr. | Extrusion | Mid Michigan | 2003 |
| Speight, Russell G., Dr. | Injection Molding | Australia/New Zealand Sec | 2018 |
| Spruiell, Joseph E., Dr. (D) | Engineering Prop & Structure | Smoky Mountain | 1995 |
| Squires, Paul H., Dr. (D) | Extrusion | Philadelphia | 1985 |
| Staats-Westover, Robert | Engineering Properties & Structure | Newark | 1994 |
| Starita, Joseph M. (D) | Plastics Analysis | Newark | 1998 |
| Starkey, Glenn | Mold Making & Mold Design | Chicago | 2005 |
| Starnes Jr., William H. | Vinyl Plastics | Virginia | 2001 |
| Steele, Gerald L., Dr. | Polymer Modifiers & Additives | Central Indiana | 1988 |
| Steil, Frederick G. | Mold Making & Mold Design | Detroit | 2008 |
| Steward, Edward L. | Extrusion | Southeastern New England | 2006 |
| Stokes, Vijay K., Dr. | Thermoplastic Materials & Foam | Hudson-Mohawk | 1995 |
| Street, Louis F. (D) | Extrusion | Newark | 1985 |
| Subramanian, Palletheri M. | Plastics Environmental | Philadelphia | 2002 |
| Sue, Hung Sue, Dr. | Engineering Properties & Structure | South Texas | 2010 |
| Suhir, Ephraim | Injection Molding | Newark | 1998 |
| Sukhadia, Ashish M. Dr. | Engineering Properties & Structure | Oklahoma | 2014 |
| Summers, James W., Dr. | Vinyl Plastics | Cleveland | 1992 |
| Sun, Luyi | Flexible Packaging | South Texas | 2016 |
| Sundararaj, Uttandaraman (U.T.), P | Applied Rheology | Ontario | 2018 |
| Tadmor, Zehev, Dr. | Extrusion | Israel | 1985 |
| Tarahomi, Sassan | Automotive | Detroit | 2014 |
| Thacker, George, Jr. | Vinyl Plastics | Miami Valley | 1986 |
| Thomas, Lowell | Injection Molding | Mid-Michigan | 1999 |
| Thompson, Michael, Dr. | Extrusion | Ontario | 2018 |
| Throne, James L., Dr. | Thermoforming | Chicago ('96 Akron) | 1986 |
| Timmerman, Jose | Injection Molding | Florida-Central Florida | 2015 |
| Tobin, William J. | Product Design & Development | Rocky Mountain | 2005 |
| Todd, David B., Dr. (D) | Extrusion | Newark | 1992 |
| Touchette, Norman W. | Vinyl Plastics | St. Louis | 1989 |
| Tres, Paul A. | Product Design & Development | Detroit | 1998 |
| Turi, Edith A., Dr. | Plastics Analysis | Newark | 1995 |
| Turner, H. Ben | Extrusion | Kentuckiana | 1996 |
| Turng, Lih-Sheng (Tom), Dr. | Injection Molding | Milwaukee | 2008 |
| Tusim, Martin H. | Thermoplastic Materials & Foams | Mid-Michigan | 2007 |
| Tzoganakis, Costas | Extrusion | Ontario | 2016 |
| Veazey, Earl W. (D) | Extrusion | South Texas | 1989 |
| Venkataswamy, Krishna, Dr. | Engineering Properties & Structure | Chicago | 2006 |
| Vlachopoulos, John | Extrusion | Ontario | 2001 |
| Wagner Jr., John R. | Extrusion | Rochester | 1989 |
| Walters, Keisha Bishop, Dr. | Bioplastics & Renewable Technology | none | 2022 |
| Weinberg, Elliott L. (D) | Vinyl Plastics | Palisades | 1990 |
| Weisfeld, Lewis B., Dr. | EPSDIV and Vinyl Plastics | Philadelphia | 1986 |
| Weiss, Robert A. | Engineering Prop & Structures | Western New England | 1999 |
| Weissmann, Dan | Blow Molding | Toledo | 1996 |
| Wenskus, James J., Jr. (D) | Injection Molding | Rochester | 1984 |
| Wetzel, Mark D. | Extrusion | Philadelphia | 2008 |
| Wheeler, Norton C., Jr. (D) | Extrusion | Connecticut | 1985 |
| White, Donald H., Dr. | Extrusion | Arizona | 1990 |
| White, James L. (D) | Engineering Properties & Structure | Akron | 1997 |
| Whitney, Alva E. (D) | Vinyl Plastics | Palisades | 2004 |
| Wickson, Edward, J. | Vinyl Plastics | Palisades | 1988 |
| Wilkes, Garth L., Dr. (D) | Engineering Properties & Structure | Virgina | 2005 |
| Williams, H. Leverne, Dr. | Engineering Properties & Structure | Ontario | 1984 |
| Williams, Joseph B, Dr. | Polymer Modifiers & Additives | Lehigh Valley | 2001 |
| Winfield, Armand | Product Design & Development | New York | 2000 |
| Witenhafer, Donald E. | Vinyl Plastics | Central Ohio | 1998 |
| Witzler, Suzanne I. | Injection Molding | Rocky Mountain | 2002 |
| Womer, Timothy W. | Polymer Analysis/Extrusion | Akron | 2002 |
| Wong, Shing-Chung Josh, Dr. | Engineering Properties & Structure | Akron | 2015 |
| Woo, Lecon, Dr. | Medical Plastics | Chicago | 1994 |
| Wright, A. Nelson (D) | Vinyl Plastics | Upper Midwest | 2000 |
| Wu, Wen-Pao | Thermoplastics Materials & Foams | Rochester | 2002 |
| Xanthos, Marino (D) | Extrusion | Newark | 2003 |
| Xiao, Karen | Extrusion | Ontario | 2016 |
| Yang, Hsinjin, Dr. | Engineering Properties & Structure | | 2019 |
| Yao, Donggang , Dr. | Applied Rheology | Southern | 2020 |
| Zatloukal, Martin | Extrusion | Czech Republic | 2013 |
