According to SPE Bylaws, “To be elected an Honored Service Member, a candidate shall have demonstrated long-term, outstanding service to, and support of, the Society and its objectives; shall be sponsored, in writing, by the Board of Directors of at least one Section or Division.”

HSM Application Deadlines:

  • Committee report forwarded to the Executive Board for endorsement – January
  • Presentation of the HSM awards certificates and pins – at ANTEC®

Submission Guidelines and Application:

The following professionals received the SPE Honored Service Member Award for 2024:

JEFFREY S. DRUSDA
TECHNICAL SERVICE PRINCIPAL SCIENTIST
THE CHEMOURS COMPANY
Nominated by the SPE Color & Appearance Division

About the Recipient
Jeffrey began working for Chemours in 2018 after 20 years of service in the effect pigments industry.  In his current role, he represents the Titanium Technologies business unit as a Technical Service Principal Scientist.  With a focus on the Americas, Jeffrey provides support and solutions for plastics applications requiring titanium dioxide aesthetics and function. Jeffrey earned a Bachelor of Arts degree in Biochemistry at East Stroudsburg University.  He served on the Color and Appearance Division (CAD) Board of Directors since 2009 and chaired the 2020 SPE CAD RETEC® event (Virtual).  Completing a rotation through the CAD executive committee in 2016, Jeffrey serves as the CAD Conference Committee Chair and on the Communication and Technical Content Review Committees.  He also supports the SPE Vinyl and Building & Infrastructure Divisions.


PIERRE R. MOULINIÉ
GLOBAL TECHNICAL MARKETING HEAD, HEALTHCARE FOR ENGINEERING PLASTICS
COVESTRO
Nominated by the SPE Medical Plastics Division

About the Recipient
Pierre has been in various technical roles at Covestro for 25 years (previously part of Bayer) and currently leads Global Technical Marketing for Healthcare in the Engineering Plastics area.  Since starting his career in plastics over 25 years ago, he has been a regular contributor to ANTEC papers, presentations, and other SPE events and has served various functions within the Society’s Engineering Properties and Structure as well as the Medical Plastics Divisions.  He is also a member of the Pittsburgh Section.  Pierre holds degrees in Chemistry from Concordia University and Carleton University in Canada.


DAVID A. OKONSKI
ENGINEERING MANAGER
IACMI-THE COMPOSITES INSTITUTE
Nominated by the SPE Detroit Section and Injection Molding Division

About the Recipient
David Okonski started his career in 1984 when he accepted a Manufacturing Engineer position at GM Research & Development; he was asked to become an expert in polymer processing and specialize in the injection molding process. David spent the next 39 years generating intellectual property on thermoplastic material systems, injection molding tooling strategies, and polymer manufacturing processes. David retired from GM on June 30th, 2023 but has since started the next chapter of his career as an Engineering Manager at the IACMI Scale-up Research Facility in Corktown, Detroit. David first joined SPE in 1992 and serves on the Board of Directors of both the Detroit Section and the Injection Molding Division.

Previous Honorees

Honored Service MemberDivisionSectionYear
Abbot, TedThermosetOntario1997
Allen, John D.Mold Making & Mold Design Cleveland2002
Andersen, Paul, Dr.ExtrusionPalisades-New Jersey2015
Andre, NormThermosetChicago1999
Anton, Stanley J.President's Cup1994
Anzini, David J.Extrusion DivisionCarolinas2022
Arduini, Alan J.Marketing & ManagementCentral Indiana2005
Arendt, William D.Vinyl PlasticsChicago1997
Arndt, R. DavidAutomotiveDetroit2002
Arnold-Feret, BarbaraProduct Design & DevelopmentNorth Texas2003
Aubrey, Barry T.Rotational MoldingMiami Valley2007
Bachman, BonnieEngineering Properties & StructureSouth Florida2001
Balthazar, Earl W., IIIColor & AppearanceNorth Texas2011
Barger, MarkBlow MoldingMid-Michigan2012
Barnes, Ralph E.Injection MoldingRochester2006
Barth, Frank J.ThermoformingQuebec1997
Barto, Charles A.Injection MoldingLehigh Valley1995
Bassett III, WilliamPolymer Modifiers & AdditivesSouth Texas2003
Basso, HelenInjection MoldingWestern Michigan2012
Batiuk, MartinExtrusionCleveland1995
Baumann, Margaret H.Marketing & ManagementNewark1994
Bayley, DennisPolymer Modifiers & AdditivesOntario2000
Beall, Glenn L.Rotational MoldingChicago2005
Beard, Robert A.Injection MoldingChicago2009
Beatty, Charles L. (D)Engineering Properties & StructureCentral Florida2005
Bennett, Joe (D)Injection MoldingCarolinas1994
Bennyhoff, BonnieAutomotiveDetroit2005
Berard, Mark T., Dr.Vinyl PlasticsGulf South Central2009
Bernacki, JohnCompositesRochester2006
Bernhardt, AnneProduct Design & DevelopmentNorth Texas2006
Biggs, SuzanneMarketing & ManagementSouth Texas2006
Blackwell, L.D.ExtrusionSouth Texas2006
Bloom, Edward S.Plastics RecyclingPhiladelphia1993
Bowland, CreigCompositesDetroit2013
Bradley, RichardVinyl PlasticsPalisades2001
Braney, Ken J.European ThermoformingUK/Ireland2011
Brax, Harri J.Marketing & ManagementCarolinas2002
Bristol, Gail R.President's CupConnecticut2008
Britton, James E.AutomotiveDetroit1996
Broome, Russell C.Marketing & ManagementPiedmont Coastal2009
Brosius, DaleThermosetDetroit2009
Browitt, TerenceMarketing & ManagementQuebec1998
Buckleitner, Eric L. (D)Moldmaking/Mold DesignWestern Michigan1993
Buckley, Daniel T.Advanced Polymer CompositesHudson-Mohawk1994
Buja, Frederick J.Mold Making & Mold DesignRochester2006
Burnett, Robert H.Vinyl PlasticsVirginia2005
Bush, Ray J.Vinyl PlasticsUK/Ireland2002
Cameron, DickMarketing & ManagementPittsburgh2005
Cameron, JoeColor & AppearanceUpper Midwest2003
Campbell, Gregory A., Dr.ExtrusionDetroit2011
Cangelosi, Frank, Dr.Polymer Modifiers & AdditivesConnecticut2009
Cappelletti, Michael (D)President's CupConnecticut2001
Carlin, Conor P.Recycling, ThermoformingPresident's Cup2021
Carlson, CharlesInjection MoldingWestern Michigan1995
Carmagnola, Ernest D.AutomotiveNew York1995
Carow, R. StevenThermosetPiedmont Coastal1999
Casey, William J.Vinyl PlasticsPalisades1993
Charvat, RobertColor & AppearanceCleveland1994
Chatterjee, Ananda M. (D)Thermoplastic Materials & FoamsSouth Texas2005
Christensen, RalphExtrusionSouth Texas1998
Claypoole, Homer 'Jack'Injection MoldingChicago1999
Coaker, A. WilliamVinyl PlasticsCleveland2003
Coel, JoeMold Making & Mold DesignMilwaukee2002
Cole, SuzanneAutomotiveDetroit2006
Coleman, Ernest A.Polymer Modifiers & AdditivesConnecticut2005
Connolly, MichaelCompositesDetroit2013
Copp, John E.Color & AppearanceMid Michigan1997
Cotten, FrankInjection MoldingPiedmont Coastal1995
Cowell, Richard D.Composites/Polymer Mod. & Add.Newark2005
Cowgill, Paul W.Injection MoldingPiedmont Coastal1994
Cramer, Robert E. (D)President's Cup1999
Cressy, Terrence Q. (D)AutomotiveDetroit2002
Cude, J. MichaelMedical PlasticsTennessee Valley2004
Cunningham, James H.Plastics RecyclingCarolinas1994
Cutroni, Frank J.Injection MoldingSouth Florida1994
Czuba, LenMedical PlasticsChicago2000
Dahl, Kenneth (D)Injection MoldingChicago1992
Davis, Charles CEngineering, Properties & Struct.Mid-Michigan1996
Davis, DonnaThermoplastic Materials & FoamsSouth Texas1999
Davis, Sandra P.Color & AppearancePhiladelphia2008
Day, Gary A.Injection MoldingWestern Michigan1997
De Craene, Jacques (D)Benelux1993
De Vos, WimPresident's Cup2015
Dealey, Robert W.Moldmaking/Mold DesignMilwaukee1994
Dean, Anthony F., Jr.ExtrusionAkron2006
Deans, FrederickAutomotiveNorthwestern PA2003
DeBoo, Robert V.ExtrusionSouthern1994
Dieckmann, DalePolymer Modifiers & AdditivesKansas City2000
Diecks, William A.Marketing & ManagementSouth Texas2002
Drieskens, GeraldInjection MoldingBenelux1998
Driscoll, Stephen BurkeEngineering Properties & Struct.Eastern New England1997
Duska, Joseph J.ExtrusionPalisades/New Jersey2011
Duvall, DonaldPlastics Pipe & FittingChicago2017
Edward, James M.ExtrusionQuebec1996
Ehr, Sharon M.Color & AppearanceWestern Michigan2010
Ehrig, Raymond J.President's Cup1993
Eichen, Laurence M. (D)Injection MoldingBaltimore-Washington1996
El-Hibri, JamalEngineering Properties & StructureSouthern2008
Erickson, David R.Injection MoldingUpper Midwest1999
Exner, William E.ThermosetChicago1992
Farren, Peter J.ExtrusionUK/Ireland2007
Fasano, Frank LColor & AppearanceSouth Florida1998
Ferguson, LewisBlow MoldingPhiladelphia2012
Fina, Paul E.ThermosetChicago1995
Fischer, Jerry M.Mold Making & Mold DesignOklahoma2009
Forger, Robert D.President's CupConnecticut1992
Fountas, Nicholas G.Injection MoldingPioneer Valley2005
Fowler, Norman E.Marketing & ManagementRochester1996
Frankland, James D. Jr.ExtrusionPittsburgh2007
Fuggiti, Henry AInjection MoldingDelaware Valley1993
Gardiner, Jay L.Mold Making & Mold DesignNew York2007
Garrett, David W.CompositesSouthern2002
Gately, Philip M.ExtrusionSE New England1995
Gedemer, Thomas J.President's Cup1990
Genet, BarbaraDecorating & AssemblyNew York1995
Glatt, Edward W."Skip"Mold Making & Mold DesignChicago1996
Goettler, Lloyd A., Dr.Engineering Properties & StructureAkron2008
Goin, CeliaPolymer Modifiers & AdditivesVirginia1998
Golding, Terry L. (D)Color & AppearanceUpper Midwest2007
Golmanavich, JerryInjection MoldingNebraska2003
Gomez, JaimePresident's Cup2014
Goodman, DonaldMarketing & ManagementPalisades2000
Grady, BrianEngineering Properties & StructureOklahoma2016
Graff, John R., Jr. (D)Color & AppearancePittsburgh1993
Gramann, Paul J., Dr.Failure Analysis & PreventioMilwaukee2022
Grelle, Peter F.Injection MoldingDetroit2006
Griep, John R. (D)ThermoformingArizona (Pres. Cup)1998
Griffing, James S.CompositesPacific Northwest2010
Grossman, Richard F.Polymer Modifiers & AdditivesPalisades2005
Grove, Dale A., Dr.CompositesOhio Firelands2008
Gupta, Rakesh K., DrPolymer Modifiers & AdditivesWest Virginia & SE Ohio2014
Haas, John F.AutomotiveDetroit2002
Hall, Dave C.Injection MoldingRochester1998
Hamel, Pierre (D)ExtrusionQuebec2012
Hayford, Dennis L.Plastics RecyclingCarolinas1992
Heinke, Richard M.Injection MoldingNebraska1999
Heitker, MarkBlow MoldingSouth Texas2013
Heitzman, ScottColor and Appearance2019
Henneberry, Gary S.Blow MoldingPhiladelphia1994
Henry, David T.Thermoplastic Materials & FoamsSouth Texas2003
Hermanson, Nancy J.Medical PlasticsMedical Plastics2002
Hertlein, Wayne M.Mold Making & Mold DesignDetroit2006
Hill, JackThermoformingMilwaukee2004
Hills, Robert G. (D)ExtrusionAkron (Pres. Cup)1995
Ho, Thoi (D)Polymer Modifers and AdditivesSouth Texas2013
Hogan, Todd A.ExtrusionMid-Michigan2004
Hollenbeck, Donald C.Injection MoldingPhiladelphia1993
Hormozi, HormozThermoplastic Materials & FoamsChicago2003
Howell, Robert T.Injection MoldingKentuckiana1992
Hull, John L. (D)Electrical & ElectronicPhiladelphia1993
Humphrey, William A.Injection MoldingNew York1993
Husti, MartinExtrusionSouth Texas1997
Irwin, ChrisBlow MoldingToledo1999
Jackson, Robert R.Blow MoldingMilwaukee2004
Jambro, Donald J.Injection MoldingRochester1996
Jana, Sadhan C., Prof.Engineering Properties & Structure and CompositesAkron2014
Janssen, CorEuropean ThermoformingBenelux2006
Johnke, Klaus-DieterAutomotiveCentral Europe2005
Johnson, David N.Color & AppearanceOhio Firelands2008
Johnson, Earle S. (D)Injection MoldingBaltimore-Washington1993
Johnson, Richard W., Dr.Vinyl PlasticsPalisades2007
Jonkers, G HBlow MoldingBenelux1999
Kaderbek, Charles J (D)AutomotiveChicago1994
Kakarala, S. NormAutomotiveDetroit2003
Kerouac, Kenneth A.Injection MoldingMid-Michigan2009
Kilpatrick, Kenneth K.Thermoplastic Materials & FoamsCarolinas1992
Kloesel, Max W.Thermoplastic Materials & FoamsSouth Texas2002
Kotak, Vijay R.Vinyl PlasticsPalisades2002
Kozak, MichaelCompositesNorth Texas2001
Kulkarni, VamanElectrical & ElectronicCarolinas2000
Kumar, AshokAutomotiveIndia1995
Lambert, MickMedical PlasticsSouthern2003
Landes, Brian, Dr.Engineering Properties & StructureMid-Michigan2015
Lee, Norman C.Blow MoldingCarolinas2001
Levine, Stuart (D)Injection MoldingNew York2004
Lewallen, LouThermoplastic Materials & FoamsDetroit1999
Lewis, RandyThermosetCaribbean1999
Lipp, PeterThermoset/Injection MoldingKentuckiana2004
Longley, William V.Color & AppearanceDetroit1996
Lopez, BenjaminBlow Molding2017
Loudin, Len L. (D)Vinyl PlasticsSouthern1994
Lutton, C.D. "Chuck"AutomotiveDetroit1995
MacLean-Blevins, Mark T.Product Design & Development2020
Martin, George C.Polymer AnalysisRochester2002
Martinez, Riccardo A.Engineering Properties & StructureMid-Hudson1992
Marx, Fred M.Vinyl PlasticsSouthern1993
Masciarelli, Alberico (D)Electrical & ElectronicEastern New England1993
Mastrodonato, Richard N.Decorating & AssemblyRochester2007
Mathis, Gwen S.ThermoformingSouthern1992
McAndrew, Francis B.Engineering Properties & StructurePalisades-New Jersey2009
McClelland, SandraPresident's CupDetroit2013
McGarry, J. J. (Jack)Blow MoldingCarolinas1994
McMurrer, Mary C. (D)Polymer Modifiers & AdditivesLehigh Valley1996
McNamara, John F.Blow MoldingMiami Valley1993
McNamara, TomInjection MoldingUpper Midwest2012
Meckley, JonathonBlow MoldingNorthwestern PA2013
Mehta, Kishor S.Injection MoldingPittsburgh1999
Mendelsohn, Morris A.Electrical & ElectronicPittsburgh1993
Merrill, Kenneth E.Injection MoldingKansas City2006
Merrington, Adrian, Dr.RecyclingDetroit Section2021
Michel, Han P.Australia-New ZealandAustralia-New ZealandZealand 2022
Miller, Henry L.Plastics AnalysisWestern Michigan1993
Miller, Richard J.ThermosetWestern Michigan1993
Miller, ThomasAutomotiveDetroit2014
Moberg, CliffordMoldmaking & Mold DesignMilwaukee2001
Monte, Salvatore J.Thermoplastic Materials & FoamsPalisades2003
Moore, Jan R.Rotational MoldingCarolinas2002
Moore, JohnInjection MoldingSouth Texas2006
Moran, MichelleMedical PlasticsChicago2003
Morrison, Thomas F.Marketing & ManagementPioneer Valley1997
Mount, Eldridge M.ExtrusionRochester2004
Mukhopadhyay, Prithu, Dr.Polymer AnalysisQuebec2015
Mulholland, Bruce M.Color & AppearanceMiami Valley2006
Murray, Allan DAutomotiveDetroit1993
Muzzy, John D.CompositesSouthern2002
Myers, Jo AnneMarketing & ManagementNewark1995
Nelson, George E.Moldmaking & Mold DesignConnecticut1993
Nenadal, C.G. "Pete"ThermosetCleveland1992
Neward, LanceProduct Design & DevelopmentGreat Salt Lake2002
Newman, Michael G.Injection MoldingOntario1999
Norris, C.K. "Tony"Plastics RecyclingUpper Midwest1996
Northrop, Dennis C.Decorating & AssemblyDetroit2007
Nunn, Richard A. (D)Marketing & ManagementConnecticut1999
Nunnaro, RalphColor & AppearanceOntario2006
O'Connell, WilliamPolymer Modifiers & AdditivesEastern New England2000
Okamoto, Kelvin T.Thermoplastic Materials & FoamsChicago2005
Owens, Scott E.President's Cup2012
Pageau, KevinAutomotiveDetroit2004
Palermo, Joseph C.AutomotiveDetroit1999
Palmer, Franklin D.ThermoformingTennessee Valley1996
Pape, Peter G.Polymer Modifiers & AdditivesMid-Michigan2007
Pauwels, YettyAdditives & Color and European ThermoformingBenelux1998
Perdikoulias, JohnExtrusionOntario2006
Peters, Russell B., Jr.ExtrusionMid-Michigan2007
Peters, Scott L.Mold Making & Mold DesignHong Kong2009
Peterson, Lloyd A.Injection MoldingChicago1992
Petrach, Robert V., Jr.Injection MoldingDetroit2020
Petrovic, Rudi R.Injection MoldingMilwaukee2002
Pham, HoaInjection MoldingPittsburgh2010
Pham, Hoang T.Engineering Properties & StructureSouth Texas2016
Phillips, TracyColor & AppearanceSouthern2012
Pickett, Thomas J.AutomotiveDetroit2006
Polemenakos, Steve C.Polymer Modifiers & AdditivesSouth Texas2004
Portnoy, Robert C.Medical PlasticsSouth Texas2002
Poston, Irvin E. (D)AutomotiveDetroit2011
Powers, Thomas E.AutomotiveDetroit2004
Price, Ronald F. (D)AutomotiveDetroit2008
Prokopyshen, Monica H.L.AutomotiveDetroit2009
Puvak, Ronald A.Blow MoldingPittsburgh2007
Radosta, Joseph A., Jr.Polymer Modifiers & AdditivesLehigh Valley1995
Rajguru, Sharad R.Injection MoldingRochester1999
Ramesh, Natarajan S.Thermoplastic Materials & FoamsNorth Texas2010
Rangos, Jr., George C. (D)Color & AppearanceOhio Firelands2002
Rao, Nippani (D)AutomotiveDetroit2005
Rathgeber, Juergen (D)ExtrusionChicago1995
Rathman, John R.Blow MoldingBartlesville-Tulsa2005
Ratzlaff, JonRotational MoldingBartlesville-Tulsa2006
Reid, Austin H.Color & AppearanceTennessee Valley2004
Reid, Sharyl M.Color & AppearanceSouthern2010
Reinker, James K.AutomotiveDetroit1997
Reso, RonAutomotiveDetroit2000
Richardson, Paul N.ExtrusionPhiladelphia1993
Richmond, LoisInjection MoldingWestern Michigan1997
Richmond, Robert M.Marketing & ManagementWestern Michigan1997
Rife, EdwardAutomotiveDetroit1998
Riley, David W. (D)Polymer Modifiers & AdditivesPalisades2002
Rios, AntoineCompositesMilwaukee2016
Rogers, JayVinyl PlasticsPalisades1997
Root, DonaldInjection MoldingDetroit2006
Rotheiser, Jordan (D)Product Design & DevelopmentChicago2002
Rush, KimberlyVinyl PlasticsChicago2015
Rushdy, A. K. "Tony"Blow MoldingQuebec1993
Russell, Robert D.Injection MoldingRochester1992
Rutland, Samuel F.Vinyl PlasticsCarolinas1993
Sadowsky, Maurice J.Marketing & ManagementPhiladelphia2004
Schipper, Peggy S.Vinyl PlasticsPalisades2006
Schmidt, Lawrence R., Dr.Injection MoldingHudson-Mohawk2007
Schneider, LarryRotational MoldingRock Valley2006
Schoeller, Russell E. (D)Blow MoldingChicago1996
Schoenberg, JulianThermoplastic Materials & FoamsCarolinas1997
Schultz, David R.Polymer Modifiers and AdditivesAkron2003
Seavey, Alton W.Injection MoldingConnecticut1995
Shah, SureshAutomotiveDetroit2004
Shah, VishuInjection MoldingSouthern California2009
Shekita, Gregory A. (D)Mold Making DesignPiedmont Coastal1997
Shelton, Harry C. (D)ThermosetBuffalo1993
Shih, Chi-KaiPolymer AnalysisBaltimore-Washington2002
Shirley, GaylordMold Making & Mold DesignSouth Florida1994
Shoemaker, Phil S.Vinyl PlasticsCarolinas1998
Shrader, Owen A.Injection MoldingKentuckiana1993
Shute, Raymond J. (D)Thermoplastic Materials & FoamsChicago2003
Simko, Timothy D.CompositesMichiana2009
Slawska, Robert A. (D)Blow MoldingNewark1998
Sloss, Thomas J.Injection MoldingConnecticut2004
Smith, Clarence G.Product Design & DevelopmentSouthern California2009
Smith, Thomas L. (D)Mold Making & Mold DesignNorthern Indiana1995
Smith, William L.Injection MoldingSouthern2009
Sosa, Marie-FranceInjection MoldingQuebec2017
Soskey, Paul R.Engineering Properties & StructureNewark2004
Spalding, MarkExtrusionMid-Michigan2012
Spalter, GaryInjection MoldingNew York1999
Squires, Paul H. (D)ExtrusionCarolinas2002
Starkey, RalphDecorating & AssemblyTri-State2006
Steele, Scott W.Blow MoldingToledo2014
Steil, Frederick G. (D)Mold Making & Mold DesignDetroit2005
Steiner, Martha M.Plastics AnalysisGolden Gate1997
Stratton, DouglasAutomotiveDetroit1998
Sun, Luyi , Dr.Engineering Properties & Structure2018
Suthers, JohnnyColor & AppearanceTN-VA-Holston Valley2003
Tam, EdwinBioplastics & Renewable Technologies and Additive Manufacturing2019
Tamsen, Roger (D)Injection MoldingMilwaukee2001
Taranto, AlfredInjection MoldingCarolinas1998
Taylor, Gerald (Gary) W. (D)Injection MoldingAkron2016
Thomas, Michael P.Injection MoldingMilwaukee2008
Todd, William H.AutomotiveDetroit1993
Trinklein, Robert S.Color & AppearanceEastern New England2005
Turng, Lih-Sheng (Tom)Injection MoldingMilwaukee2014
Uglum, Paul A.Decorating & Assembly2016
Vadhar, Parimal (Perry)Thermoplastic Materials & FoamsFlexible PackagingCarolinas2014
Vaidya, UdayComposites2018
Wagner, John R., Jr.ExtrusionRochester2015
Wagner, Richard C.Flexible PackagingSouth Texas2007
Walker, Dale (D)ExtrusionSouth Texas1999
Waller, PaulFlexible PackagingOntario2007
Walling, Ronald L.Plastics EnvironmentalChicago2003
Walsh, ThomasEngineering Properties & StructureSouth Texas2003
Wayrick, IsobelMarketing & ManagementNewark2000
Wegelin, Robert C.Polymer Modifiers & AdditivesAkron2004
Weinberg, Elliott (D)Polymer Modifiers & AdditivesPalisades2001
Weisfeld, Lewis B.Vinyl PlasticsPhiladelphia2002
Wells, WilliamThermoformingMid-Michigan2006
Wendle, Bruce C.Injection MoldingPacific Northwest1992
Wenskus, James J. Jr. (D)Injection MoldingRochester2005
West, BrianColor & AppearanceSmoky Mountain2000
Whitney, Jr., Alva E. (D)Vinyl PlasticsPalisades1992
Williams, GordonBlow MoldingNewark2001
Williams, JosephPolymer Modifiers & AdditivesLehigh Valley2000
Windscheif, William J.AutomotiveDetroit2016
Winkler, Karen L.Medical PlasticsSouthern2007
Witenhafer, Donald E., Dr. (D)Engineering Properties & StructureCentral Texas2008
Witzler, Suzy I.Injection MoldingRocky Mountain2002
Wolverton, Mark, P.Product Design & DevelopmentChicago2015
Womer, Timothy W.ExtrusionAkron2010
Wright, A. Nelson (D)Vinyl PlasticsQuebec1997
Wyer, Raymond T., JrInjection MoldingChicago1999
Yarbrough, DelbertBlow MoldingSouthern California1995
Zeller, Robert C.Color & AppearanceLehigh Valley1997
Zimmerman, Charles C. (D)Injection MoldingSouthern California1993